betterunborn
Posts: 8
Joined: Wed Jul 26, 2017 7:35 pm

Sound output over HDMI lost (Radeon R270)

Sat Aug 04, 2018 4:49 pm

Hi all,

it must have happened with a very recent update, but all of the sudden my sound output over HDMI is lost. It definitely worked a few weeks ago, as it had worked out-of-the-box when installing.
Graphics card: Radeon X270
In Pulseaudio volume control (pavucontrol) I can still see a "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]" entry, but all Profile options inside are marked as (unavailable) ... selecting them yields nothing.
I already tried kernel parameter "amdgpu.dc=0" and "amdgpu.dc=1", both had no effect.

lspci -v lists them as following:

Code: Select all

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Curacao PRO [Radeon R7 370 / R9 270/370 OEM] (prog-if 00 [VGA controller])
	Subsystem: Hightech Information System Ltd. Curacao PRO [Radeon R7 370 / R9 270/370 OEM]
	Flags: bus master, fast devsel, latency 0, IRQ 34
	Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Memory at f7e00000 (64-bit, non-prefetchable) [size=256K]
	I/O ports at e000 [size=256]
	Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: [48] Vendor Specific Information: Len=08 <?>
	Capabilities: [50] Power Management version 3
	Capabilities: [58] Express Legacy Endpoint, MSI 00
	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
	Capabilities: [150] Advanced Error Reporting
	Capabilities: [200] #15
	Capabilities: [270] #19
	Capabilities: [2b0] Address Translation Service (ATS)
	Capabilities: [2c0] Page Request Interface (PRI)
	Capabilities: [2d0] Process Address Space ID (PASID)
	Kernel driver in use: amdgpu

01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
	Subsystem: Hightech Information System Ltd. Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
	Flags: bus master, fast devsel, latency 0, IRQ 33
	Memory at f7e60000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [48] Vendor Specific Information: Len=08 <?>
	Capabilities: [50] Power Management version 3
	Capabilities: [58] Express Legacy Endpoint, MSI 00
	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
	Capabilities: [150] Advanced Error Reporting
	Kernel driver in use: snd_hda_intel

Anyone facing the same or any more ideas to try out?

Thanks in advance ...

betterunborn
Posts: 8
Joined: Wed Jul 26, 2017 7:35 pm

Re: Sound output over HDMI lost (Radeon R270)

Sat Aug 04, 2018 5:04 pm

Forgot the most important part ... here's my dmesg pt1 ...

Code: Select all

[    0.000000] microcode: microcode updated early to revision 0x24, date = 2018-01-21
[    0.000000] Linux version 4.17.11-84.current (root@builder.solus-project.com) (gcc version 7.3.0 (Solus)) #1 SMP PREEMPT Sat Jul 28 13:53:22 UTC 2018
[    0.000000] Command line: initrd=\EFI\com.solus-project\initrd-com.solus-project.current.4.17.11-84 root=PARTUUID=70f8b968-6928-4888-8df1-08667ae3a4dc quiet loglevel=3 splash systemd.show_status=false rw radeon.si_support=0 radeon.cik_support=0 amdgpu.si_support=1 amdgpu.cik_support=1 amdgpu.dc=0
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be0f7fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be0f8000-0x00000000be0fefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000be0ff000-0x00000000be561fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be562000-0x00000000be9b2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000be9b3000-0x00000000ddab5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ddab6000-0x00000000ddb1efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ddb1f000-0x00000000ddb3cfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000ddb3d000-0x00000000de060fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000de061000-0x00000000deffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xbc0c8018-0xbc0e6057] usable ==> usable
[    0.000000] e820: update [mem 0xbc0c8018-0xbc0e6057] usable ==> usable
[    0.000000] e820: update [mem 0xbc0ba018-0xbc0c7857] usable ==> usable
[    0.000000] e820: update [mem 0xbc0ba018-0xbc0c7857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000bc0ba017] usable
[    0.000000] reserve setup_data: [mem 0x00000000bc0ba018-0x00000000bc0c7857] usable
[    0.000000] reserve setup_data: [mem 0x00000000bc0c7858-0x00000000bc0c8017] usable
[    0.000000] reserve setup_data: [mem 0x00000000bc0c8018-0x00000000bc0e6057] usable
[    0.000000] reserve setup_data: [mem 0x00000000bc0e6058-0x00000000be0f7fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000be0f8000-0x00000000be0fefff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000be0ff000-0x00000000be561fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000be562000-0x00000000be9b2fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000be9b3000-0x00000000ddab5fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000ddab6000-0x00000000ddb1efff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ddb1f000-0x00000000ddb3cfff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000ddb3d000-0x00000000de060fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000de061000-0x00000000deffefff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000defff000-0x00000000deffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000041effffff] usable
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ESRT=0xdef57898  ACPI 2.0=0xddb26000  ACPI=0xddb26000  SMBIOS=0xf04d0  MPS=0xfd5d0 
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: ASUS All Series/Z97-P, BIOS 2803 05/21/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7C00000000 write-back
[    0.000000]   1 base 0400000000 mask 7FF0000000 write-back
[    0.000000]   2 base 0410000000 mask 7FF8000000 write-back
[    0.000000]   3 base 0418000000 mask 7FFC000000 write-back
[    0.000000]   4 base 041C000000 mask 7FFE000000 write-back
[    0.000000]   5 base 041E000000 mask 7FFF000000 write-back
[    0.000000]   6 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] mapped at [        (ptrval)]
[    0.000000] esrt: Reserving ESRT space from 0x00000000def57898 to 0x00000000def578d0.
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x02913000, 0x02913fff] PGTABLE
[    0.000000] BRK [0x02914000, 0x02914fff] PGTABLE
[    0.000000] BRK [0x02915000, 0x02915fff] PGTABLE
[    0.000000] BRK [0x02916000, 0x02916fff] PGTABLE
[    0.000000] BRK [0x02917000, 0x02917fff] PGTABLE
[    0.000000] BRK [0x02918000, 0x02918fff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x7e676000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000DDB26000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DDB26088 00008C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DDB35000 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DDB261B0 00EE4A (v02 ALASKA A M I    00000011 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000DE060F80 000040
[    0.000000] ACPI: APIC 0x00000000DDB35110 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DDB35188 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DDB351D0 000C7D (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DDB35E50 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DDB36390 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DDB36F08 0001C7 (v01 PmRef  LakeTiny 00003000 INTL 20051117)
[    0.000000] ACPI: MCFG 0x00000000DDB370D0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DDB37110 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DDB37148 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DDB374B8 005977 (v01 SaSsdt SaSsdt   00003000 INTL 20120711)
[    0.000000] ACPI: DMAR 0x00000000DDB3CED0 000080 (v01 INTEL  BDW      00000001 INTL 00000001)
[    0.000000] ACPI: UEFI 0x00000000DDB3CE88 000042 (v01 ALASKA A M I    01072009      00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x41eff9000-0x41effafff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000041effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000be0f7fff]
[    0.000000]   node   0: [mem 0x00000000be0ff000-0x00000000be561fff]
[    0.000000]   node   0: [mem 0x00000000be9b3000-0x00000000ddab5fff]
[    0.000000]   node   0: [mem 0x00000000defff000-0x00000000deffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000041effffff]
[    0.000000] Reserved but unavailable: 10756 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
[    0.000000] On node 0 totalpages: 4179452
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 24 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14106 pages used for memmap
[    0.000000]   DMA32 zone: 902751 pages, LIFO batch:31
[    0.000000]   Normal zone: 51136 pages used for memmap
[    0.000000]   Normal zone: 3272704 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbc0ba000-0xbc0bafff]
[    0.000000] PM: Registered nosave memory: [mem 0xbc0c7000-0xbc0c7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbc0c8000-0xbc0c8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbc0e6000-0xbc0e6fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe0f8000-0xbe0fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe562000-0xbe9b2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xddab6000-0xddb1efff]
[    0.000000] PM: Registered nosave memory: [mem 0xddb1f000-0xddb3cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xddb3d000-0xde060fff]
[    0.000000] PM: Registered nosave memory: [mem 0xde061000-0xdeffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x86/0x509 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:48 nr_cpumask_bits:48 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @        (ptrval) s141720 r8192 d30312 u524288
[    0.000000] pcpu-alloc: s141720 r8192 d30312 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4114122
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: initrd=\EFI\com.solus-project\initrd-com.solus-project.current.4.17.11-84 root=PARTUUID=70f8b968-6928-4888-8df1-08667ae3a4dc quiet loglevel=3 splash systemd.show_status=false rw radeon.si_support=0 radeon.cik_support=0 amdgpu.si_support=1 amdgpu.cik_support=1 amdgpu.dc=0
[    0.000000] Memory: 16030496K/16717808K available (12300K kernel code, 1286K rwdata, 2592K rodata, 1528K init, 552K bss, 687312K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 37071 entries in 145 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=48 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: (none).
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180313
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] DMAR: Host address width 39
[    0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[    0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.000000] DMAR: RMRR base: 0x000000dee7b000 end: 0x000000dee89fff
[    0.000000] DMAR-IR: IOAPIC id 8 under DRHD base  0xfed90000 IOMMU 0
[    0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[    0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.005000] tsc: Fast TSC calibration using PIT
[    0.006000] tsc: Detected 3198.343 MHz processor
[    0.006000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e1a2cebd50, max_idle_ns: 440795297394 ns
[    0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6396.68 BogoMIPS (lpj=3198343)
[    0.006000] pid_max: default: 32768 minimum: 301
[    0.006000] Security Framework initialized
[    0.006000] Yama: becoming mindful.
[    0.006000] AppArmor: AppArmor initialized
[    0.009731] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.011201] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.011257] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.011303] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.011446] CPU: Physical Processor ID: 0
[    0.011447] CPU: Processor Core ID: 0
[    0.011451] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.011452] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.011455] mce: CPU supports 9 MCE banks
[    0.011462] CPU0: Thermal monitoring enabled (TM1)
[    0.011474] process: using mwait in idle threads
[    0.011475] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.011476] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.011478] Spectre V2 : Mitigation: Full generic retpoline
[    0.011478] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.011478] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.011479] Speculative Store Bypass: Vulnerable
[    0.011552] Freeing SMP alternatives memory: 36K
[    0.018678] TSC deadline timer enabled
[    0.018681] smpboot: CPU0: Intel(R) Core(TM) i5-4460  CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.023017] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.023049] ... version:                3
[    0.023049] ... bit width:              48
[    0.023050] ... generic registers:      8
[    0.023050] ... value mask:             0000ffffffffffff
[    0.023051] ... max period:             00007fffffffffff
[    0.023051] ... fixed-purpose events:   3
[    0.023052] ... event mask:             00000007000000ff
[    0.024004] Hierarchical SRCU implementation.
[    0.026102] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.027006] smp: Bringing up secondary CPUs ...
[    0.033020] x86: Booting SMP configuration:
[    0.033021] .... node  #0, CPUs:      #1 #2 #3
[    0.038020] smp: Brought up 1 node, 4 CPUs
[    0.038020] smpboot: Max logical packages: 1
[    0.038020] smpboot: Total of 4 processors activated (25586.74 BogoMIPS)
[    0.039288] devtmpfs: initialized
[    0.039288] PM: Registering ACPI NVS region [mem 0xbe0f8000-0xbe0fefff] (28672 bytes)
[    0.039288] PM: Registering ACPI NVS region [mem 0xddb3d000-0xde060fff] (5390336 bytes)
[    0.039288] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.039288] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.039288] xor: automatically using best checksumming function   avx       
[    0.039288] pinctrl core: initialized pinctrl subsystem
[    0.039288] NET: Registered protocol family 16
[    0.039288] audit: initializing netlink subsys (disabled)
[    0.039288] audit: type=2000 audit(1533403942.039:1): state=initialized audit_enabled=0 res=1
[    0.039288] cpuidle: using governor ladder
[    0.039288] cpuidle: using governor menu
[    0.039288] ACPI: bus type PCI registered
[    0.039288] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.040019] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.040021] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.040025] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.040074] PCI: Using configuration type 1 for base access
[    0.040114] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.040691] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.040691] cryptd: max_cpu_qlen set to 1000
[    0.056009] raid6: sse2x1   gen() 11480 MB/s
[    0.073010] raid6: sse2x1   xor()  8107 MB/s
[    0.090017] raid6: sse2x2   gen() 13410 MB/s
[    0.107019] raid6: sse2x2   xor()  8884 MB/s
[    0.124023] raid6: sse2x4   gen() 16171 MB/s
[    0.141026] raid6: sse2x4   xor() 10095 MB/s
[    0.158030] raid6: avx2x1   gen() 22351 MB/s
[    0.175033] raid6: avx2x1   xor() 15406 MB/s
[    0.192037] raid6: avx2x2   gen() 25792 MB/s
[    0.209039] raid6: avx2x2   xor() 16232 MB/s
[    0.226044] raid6: avx2x4   gen() 30210 MB/s
[    0.243046] raid6: avx2x4   xor() 18271 MB/s
[    0.243047] raid6: using algorithm avx2x4 gen() 30210 MB/s
[    0.243048] raid6: .... xor() 18271 MB/s, rmw enabled
[    0.243048] raid6: using avx2x2 recovery algorithm
[    0.244002] ACPI: Added _OSI(Module Device)
[    0.244002] ACPI: Added _OSI(Processor Device)
[    0.244002] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.244002] ACPI: Added _OSI(Processor Aggregator Device)
[    0.244002] ACPI: Added _OSI(Linux-Dell-Video)
[    0.245264] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.245267] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.245269] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.245294] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.245296] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.245297] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.245299] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.245301] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.245302] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.245367] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.245369] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.245370] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.245573] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.245574] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.245576] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.245646] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.245647] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.245648] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.245914] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.245915] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.245917] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.245919] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.245921] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.245922] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.246625] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.246627] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.246628] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.246631] ACPI Error: Result stack is empty! State=        (ptrval) (20180313/dswstate-65)
[    0.246632] ACPI Error: AE_AML_NO_RETURN_VALUE, Missing or null operand (20180313/dsutils-612)
[    0.246634] ACPI Error: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20180313/dsutils-727)
[    0.251964] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.256101] ACPI: Dynamic OEM Table Load:
[    0.256101] ACPI: SSDT 0xFFFF88040C359000 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.256228] ACPI: Dynamic OEM Table Load:
[    0.256228] ACPI: SSDT 0xFFFF88040C131800 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.257070] ACPI: Dynamic OEM Table Load:
[    0.257073] ACPI: SSDT 0xFFFF88040C356600 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.257324] ACPI: Interpreter enabled
[    0.257345] ACPI: (supports S0 S3 S4 S5)
[    0.257345] ACPI: Using IOAPIC for interrupt routing
[    0.257364] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.257606] ACPI: Enabled 10 GPEs in block 00 to 3F
[    0.258277] ACPI: Power Resource [PG00] (on)
[    0.258486] ACPI: Power Resource [PG01] (on)
[    0.258688] ACPI: Power Resource [PG02] (on)
[    0.264451] ACPI: Power Resource [FN00] (off)
[    0.264502] ACPI: Power Resource [FN01] (off)
[    0.264553] ACPI: Power Resource [FN02] (off)
[    0.264603] ACPI: Power Resource [FN03] (off)
[    0.264652] ACPI: Power Resource [FN04] (off)
[    0.265491] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.265495] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.266026] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.266507] PCI host bridge to bus 0000:00
[    0.266509] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.266510] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.266511] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.266512] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.266513] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.266514] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.266515] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.266516] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.266518] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.266523] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.266595] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.266626] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.266729] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[    0.266748] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
[    0.266802] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.266862] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[    0.266882] pci 0000:00:16.0: reg 0x10: [mem 0xf7f19000-0xf7f1900f 64bit]
[    0.266938] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.267016] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[    0.267036] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff]
[    0.267111] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.267175] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[    0.267192] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
[    0.267246] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.267315] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[    0.267379] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.267395] pci 0000:00:1c.0: Enabling MPC IRBNCE
[    0.267397] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[    0.267482] pci 0000:00:1c.2: [8086:8c94] type 01 class 0x060400
[    0.267547] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.267562] pci 0000:00:1c.2: Enabling MPC IRBNCE
[    0.267563] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[    0.267646] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[    0.267710] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.267804] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[    0.267824] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f16000-0xf7f163ff]
[    0.267899] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.267965] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[    0.268116] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[    0.268131] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.268138] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.268144] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.268151] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.268157] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.268164] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f15000-0xf7f157ff]
[    0.268195] pci 0000:00:1f.2: PME# supported from D3hot
[    0.268250] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[    0.268267] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f14000-0xf7f140ff 64bit]
[    0.268285] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.268380] pci 0000:01:00.0: [1002:6811] type 00 class 0x030000
[    0.268403] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.268412] pci 0000:01:00.0: reg 0x18: [mem 0xf7e00000-0xf7e3ffff 64bit]
[    0.268419] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.268431] pci 0000:01:00.0: reg 0x30: [mem 0xf7e40000-0xf7e5ffff pref]
[    0.268443] pci 0000:01:00.0: BAR 0: assigned to efifb
[    0.268485] pci 0000:01:00.0: supports D1 D2
[    0.268486] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.268544] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[    0.268563] pci 0000:01:00.1: reg 0x10: [mem 0xf7e60000-0xf7e63fff 64bit]
[    0.268633] pci 0000:01:00.1: supports D1 D2
[    0.268694] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.268696] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.268698] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.268700] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.268747] acpiphp: Slot [1] registered
[    0.268752] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.268816] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.268844] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.268871] pci 0000:03:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit]
[    0.268888] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.268982] pci 0000:03:00.0: supports D1 D2
[    0.268983] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.269095] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.269098] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.269101] pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.269106] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.269244] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[    0.269791] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
[    0.269799] pci 0000:00:1c.3:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.269800] pci 0000:00:1c.3:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.269801] pci 0000:00:1c.3:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.269802] pci 0000:00:1c.3:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.269803] pci 0000:00:1c.3:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.269804] pci 0000:00:1c.3:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.269805] pci 0000:00:1c.3:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.269806] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[    0.269913] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[    0.269931] pci 0000:04:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.269932] pci 0000:04:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.269933] pci 0000:04:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.269934] pci 0000:04:00.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.269935] pci 0000:04:00.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.269936] pci 0000:04:00.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.269937] pci 0000:04:00.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.269938] pci 0000:04:00.0:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[    0.270459] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.270501] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.270543] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[    0.270585] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.270626] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.270667] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.270708] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.270748] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.271011] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.271011] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.271011] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.271011] vgaarb: loaded
[    0.271053] SCSI subsystem initialized
[    0.272007] libata version 3.00 loaded.
[    0.272017] EDAC MC: Ver: 3.0.0
[    0.272066] Registered efivars operations
[    0.274430] PCI: Using ACPI for IRQ routing
[    0.275643] PCI: pci_cache_line_size set to 64 bytes
[    0.275679] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.275680] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.275681] e820: reserve RAM buffer [mem 0xbc0ba018-0xbfffffff]
[    0.275682] e820: reserve RAM buffer [mem 0xbc0c8018-0xbfffffff]
[    0.275683] e820: reserve RAM buffer [mem 0xbe0f8000-0xbfffffff]
[    0.275684] e820: reserve RAM buffer [mem 0xbe562000-0xbfffffff]
[    0.275684] e820: reserve RAM buffer [mem 0xddab6000-0xdfffffff]
[    0.275685] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.275686] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
[    0.276000] NetLabel: Initializing
[    0.276000] NetLabel:  domain hash size = 128
[    0.276000] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.276000] NetLabel:  unlabeled traffic allowed by default
[    0.276046] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.276051] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.279010] clocksource: Switched to clocksource tsc-early
[    0.287561] VFS: Disk quotas dquot_6.6.0
[    0.287572] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.287649] AppArmor: AppArmor Filesystem Enabled
[    0.287667] pnp: PnP ACPI init
[    0.287775] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.287778] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.287847] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.287850] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.287864] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.287888] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.287891] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.287986] system 00:04: [io  0x0a00-0x0a1f] has been reserved
[    0.287988] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.287989] system 00:04: [io  0x0a20-0x0a2f] has been reserved
[    0.287991] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.288045] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.288048] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.288218] pnp 00:06: [dma 0 disabled]
[    0.288249] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.288450] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.288452] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.288453] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.288454] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.288455] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.288456] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.288458] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.288459] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.288461] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.288462] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.288463] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.288464] system 00:07: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[    0.288467] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.288594] pnp: PnP ACPI: found 8 devices
[    0.293853] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.293888] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.293890] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.293892] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.293894] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.293897] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.293905] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.293908] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.293912] pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.293915] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.293920] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.293936] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[    0.293946] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.293947] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.293948] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.293949] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.293950] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.293951] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.293952] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.293953] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff window]
[    0.293954] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.293955] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
[    0.293956] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.293957] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.293958] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.293959] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.293960] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.293961] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.293962] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.293963] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.293964] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.293965] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.293966] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.293967] pci_bus 0000:04: resource 11 [mem 0xe0000000-0xfeafffff window]
[    0.293968] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.293969] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.293970] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.293971] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.293972] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.293973] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.293974] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.293975] pci_bus 0000:05: resource 11 [mem 0xe0000000-0xfeafffff window]
[    0.294050] NET: Registered protocol family 2
[    0.294147] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.294195] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.294386] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.294550] TCP: Hash tables configured (established 131072 bind 65536)
[    0.294576] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.294625] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.294686] NET: Registered protocol family 1
[    0.312074] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x690 took 16835 usecs
[    0.329071] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x690 took 16584 usecs
[    0.329085] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.329089] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[    0.329127] PCI: CLS 64 bytes, default 64
[    0.329154] Trying to unpack rootfs image as initramfs...
[    0.668476] Freeing initrd memory: 26148K
[    0.668500] DMAR: No ATSR found
[    0.668526] DMAR: dmar0: Using Queued invalidation
[    0.668533] DMAR: Setting RMRR:
[    0.668581] DMAR: Setting identity map for device 0000:00:14.0 [0xdee7b000 - 0xdee89fff]
[    0.668616] DMAR: Setting identity map for device 0000:00:1a.0 [0xdee7b000 - 0xdee89fff]
[    0.668647] DMAR: Setting identity map for device 0000:00:1d.0 [0xdee7b000 - 0xdee89fff]
[    0.668660] DMAR: Prepare 0-16MiB unity mapping for LPC
[    0.668684] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[    0.668694] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    0.668722] iommu: Adding device 0000:00:00.0 to group 0
[    0.668732] iommu: Adding device 0000:00:01.0 to group 1
[    0.668738] iommu: Adding device 0000:00:14.0 to group 2
[    0.668745] iommu: Adding device 0000:00:16.0 to group 3
[    0.668751] iommu: Adding device 0000:00:1a.0 to group 4
[    0.668756] iommu: Adding device 0000:00:1b.0 to group 5
[    0.668762] iommu: Adding device 0000:00:1c.0 to group 6
[    0.668768] iommu: Adding device 0000:00:1c.2 to group 7
[    0.668776] iommu: Adding device 0000:00:1c.3 to group 8
[    0.668783] iommu: Adding device 0000:00:1d.0 to group 9
[    0.668793] iommu: Adding device 0000:00:1f.0 to group 10
[    0.668799] iommu: Adding device 0000:00:1f.2 to group 10
[    0.668804] iommu: Adding device 0000:00:1f.3 to group 10
[    0.668807] iommu: Adding device 0000:01:00.0 to group 1
[    0.668811] iommu: Adding device 0000:01:00.1 to group 1
[    0.668818] iommu: Adding device 0000:03:00.0 to group 11
[    0.668822] iommu: Adding device 0000:04:00.0 to group 8
[    0.670064] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    0.670064] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    0.670065] RAPL PMU: hw unit of domain package 2^-14 Joules
[    0.670065] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    0.670066] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    0.670188] simple-framebuffer simple-framebuffer.0: framebuffer at 0xe0000000, 0x12c000 bytes, mapped to 0x        (ptrval)
[    0.670189] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=640x480x32, linelength=2560
[    0.670669] Console: switching to colour frame buffer device 80x30
[    0.671097] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    0.672099] Initialise system trusted keyrings
[    0.672117] workingset: timestamp_bits=44 max_order=22 bucket_order=0
[    0.673258] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled
[    0.674025] NET: Registered protocol family 38
[    0.674040] Key type asymmetric registered
[    0.674041] Asymmetric key parser 'x509' registered
[    0.674050] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.674068] io scheduler noop registered
[    0.674069] io scheduler deadline registered (default)
[    0.674098] io scheduler cfq registered
[    0.674099] io scheduler mq-deadline registered (default)
[    0.674099] io scheduler kyber registered
[    0.674113] io scheduler bfq registered
[    0.674532] pcieport 0000:00:01.0: Signaling PME with IRQ 25
[    0.674548] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[    0.674563] pcieport 0000:00:1c.2: Signaling PME with IRQ 27
[    0.674579] intel_idle: MWAIT substates: 0x42120
[    0.674579] intel_idle: v0.4.1 model 0x3C
[    0.674681] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.674825] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.695348] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.695663] Linux agpgart interface v0.103
[    0.696938] brd: module loaded
[    0.697561] loop: module loaded
[    0.697795] i8042: PNP: No PS/2 controller found.
[    0.697836] mousedev: PS/2 mouse device common for all mice
[    0.697863] rtc_cmos 00:02: RTC can wake from S4
[    0.697980] rtc_cmos 00:02: registered as rtc0
[    0.697989] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.698100] device-mapper: uevent: version 1.0.3
[    0.698146] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    0.698206] device-mapper: multipath round-robin: version 1.2.0 loaded
[    0.698206] device-mapper: multipath queue-length: version 0.2.0 loaded
[    0.698207] device-mapper: multipath service-time: version 0.3.0 loaded
[    0.698216] intel_pstate: Intel P-state driver initializing
[    0.698452] NET: Registered protocol family 10
[    0.698593] Segment Routing with IPv6
[    0.698603] mip6: Mobile IPv6
[    0.698605] NET: Registered protocol family 17
[    0.698628] Key type dns_resolver registered
[    0.698799] microcode: sig=0x306c3, pf=0x2, revision=0x24
[    0.698820] microcode: Microcode Update Driver: v2.2.
[    0.698825] AVX2 version of gcm_enc/dec engaged.
[    0.698826] AES CTR mode by8 optimization enabled
[    0.699059] sched_clock: Marking stable (699056200, 0)->(695087847, 3968353)
[    0.699198] registered taskstats version 1
[    0.699198] Loading compiled-in X.509 certificates
[    0.699337] Btrfs loaded, crc32c=crc32c-intel
[    0.700422] Key type encrypted registered
[    0.700426] AppArmor: AppArmor sha1 policy hashing enabled
[    0.700800] rtc_cmos 00:02: setting system clock to 2018-08-04 17:32:23 UTC (1533403943)
[    0.701914] Freeing unused kernel memory: 1528K
[    0.701915] Write protecting the kernel read-only data: 18432k
[    0.702255] Freeing unused kernel memory: 2008K
[    0.704547] Freeing unused kernel memory: 1504K
[    0.704551] rodata_test: all tests were successful
[    0.716708] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[    0.716858] systemd[1]: Detected architecture x86-64.
[    0.716860] systemd[1]: Running in initial RAM disk.
[    0.718093] random: systemd: uninitialized urandom read (16 bytes read)
[    0.718099] systemd[1]: Initializing machine ID from random generator.
[    0.744779] random: systemd: uninitialized urandom read (16 bytes read)

betterunborn
Posts: 8
Joined: Wed Jul 26, 2017 7:35 pm

Re: Sound output over HDMI lost (Radeon R270)

Sat Aug 04, 2018 5:14 pm

... and pt2

Code: Select all

[    0.744811] systemd[1]: Listening on Journal Audit Socket.
[    0.744851] random: systemd: uninitialized urandom read (16 bytes read)
[    0.744876] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    0.744886] systemd[1]: Reached target Paths.
[    0.744893] systemd[1]: Reached target Timers.
[    0.744901] systemd[1]: Reached target Slices.
[    0.744929] systemd[1]: Listening on udev Kernel Socket.
[    0.844593] ACPI: bus type USB registered
[    0.844609] usbcore: registered new interface driver usbfs
[    0.844614] usbcore: registered new interface driver hub
[    0.844633] usbcore: registered new device driver usb
[    0.845057] ahci 0000:00:1f.2: version 3.0
[    0.845218] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[    0.845220] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    0.845665] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.846873] ehci-pci: EHCI PCI platform driver
[    0.858470] scsi host0: ahci
[    0.858634] scsi host1: ahci
[    0.859009] scsi host2: ahci
[    0.859872] scsi host3: ahci
[    0.859950] scsi host4: ahci
[    0.860026] scsi host5: ahci
[    0.860066] ata1: SATA max UDMA/133 abar m2048@0xf7f15000 port 0xf7f15100 irq 28
[    0.860068] ata2: SATA max UDMA/133 abar m2048@0xf7f15000 port 0xf7f15180 irq 28
[    0.860069] ata3: DUMMY
[    0.860071] ata4: SATA max UDMA/133 abar m2048@0xf7f15000 port 0xf7f15280 irq 28
[    0.860073] ata5: SATA max UDMA/133 abar m2048@0xf7f15000 port 0xf7f15300 irq 28
[    0.860074] ata6: DUMMY
[    0.860205] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.860210] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.860219] ehci-pci 0000:00:1a.0: debug port 2
[    0.864131] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.864143] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7f17000
[    0.871039] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.871066] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    0.871068] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.871069] usb usb1: Product: EHCI Host Controller
[    0.871070] usb usb1: Manufacturer: Linux 4.17.11-84.current ehci_hcd
[    0.871071] usb usb1: SerialNumber: 0000:00:1a.0
[    0.871225] hub 1-0:1.0: USB hub found
[    0.871230] hub 1-0:1.0: 2 ports detected
[    0.871400] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.871403] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.871411] ehci-pci 0000:00:1d.0: debug port 2
[    0.875301] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.875309] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f16000
[    0.882040] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.882063] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    0.882064] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.882065] usb usb2: Product: EHCI Host Controller
[    0.882066] usb usb2: Manufacturer: Linux 4.17.11-84.current ehci_hcd
[    0.882067] usb usb2: SerialNumber: 0000:00:1d.0
[    0.882214] hub 2-0:1.0: USB hub found
[    0.882219] hub 2-0:1.0: 2 ports detected
[    0.882409] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.882412] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.883485] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.883490] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.883588] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    0.883590] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.883591] usb usb3: Product: xHCI Host Controller
[    0.883591] usb usb3: Manufacturer: Linux 4.17.11-84.current xhci-hcd
[    0.883592] usb usb3: SerialNumber: 0000:00:14.0
[    0.883871] hub 3-0:1.0: USB hub found
[    0.883890] hub 3-0:1.0: 14 ports detected
[    0.884805] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.884808] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.884810] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.884840] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[    0.884841] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.884842] usb usb4: Product: xHCI Host Controller
[    0.884843] usb usb4: Manufacturer: Linux 4.17.11-84.current xhci-hcd
[    0.884844] usb usb4: SerialNumber: 0000:00:14.0
[    0.884910] hub 4-0:1.0: USB hub found
[    0.884921] hub 4-0:1.0: 6 ports detected
[    1.141743] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.141759] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.141874] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.141888] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.142208] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20180313/psargs-330)
[    1.142213] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20180313/psparse-516)
[    1.142297] ata4.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[    1.142298] ata4.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.142642] ata4.00: configured for UDMA/133
[    1.142889] ata1.00: ATAPI: HL-DT-ST DVDRAM GH24NSC0, LK00, max UDMA/133
[    1.143428] ata5.00: ATA-9: SanDisk SD8SNAT256G1122, Z2201000, max UDMA/133
[    1.143439] ata5.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.143962] ata2.00: ATAPI: TSSTcorp CDDVDW SH-222BB, SB00, max UDMA/100
[    1.144420] ata1.00: configured for UDMA/133
[    1.144902] ata2.00: configured for UDMA/100
[    1.147110] ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20180313/psargs-330)
[    1.147114] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20180313/psparse-516)
[    1.148384] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH24NSC0  LK00 PQ: 0 ANSI: 5
[    1.151177] ata5.00: configured for UDMA/133
[    1.162030] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.178031] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.178118] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[    1.186772] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-222BB  SB00 PQ: 0 ANSI: 5
[    1.190829] usb 4-1: New USB device found, idVendor=174c, idProduct=5106, bcdDevice= 0.01
[    1.190831] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    1.190832] usb 4-1: Product: AS2105
[    1.190833] usb 4-1: Manufacturer: ASMedia
[    1.190834] usb 4-1: SerialNumber:      WD-WX61A95D4KJA
[    1.193302] usb-storage 4-1:1.0: USB Mass Storage device detected
[    1.193434] scsi host6: usb-storage 4-1:1.0
[    1.193481] usbcore: registered new interface driver usb-storage
[    1.193791] usbcore: registered new interface driver uas
[    1.218098] scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG SSD 830  3B1Q PQ: 0 ANSI: 5
[    1.218277] scsi 4:0:0:0: Direct-Access     ATA      SanDisk SD8SNAT2 1000 PQ: 0 ANSI: 5
[    1.221537] sd 3:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.221538] sd 4:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.221542] sd 4:0:0:0: [sdb] Write Protect is off
[    1.221543] sd 3:0:0:0: [sda] Write Protect is off
[    1.221544] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.221544] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.221549] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.221550] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.223366]  sda: sda1 sda2
[    1.223529] sd 3:0:0:0: [sda] Attached SCSI disk
[    1.223796]  sdb: sdb1 sdb2 sdb3 sdb4
[    1.223949] sd 4:0:0:0: [sdb] Attached SCSI disk
[    1.242515] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.242517] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.242612] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.247524] random: fast init done
[    1.283835] sr 1:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.283929] sr 1:0:0:0: Attached scsi CD-ROM sr1
[    1.290454] usb 1-1: New USB device found, idVendor=8087, idProduct=8009, bcdDevice= 0.00
[    1.290456] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.290671] hub 1-1:1.0: USB hub found
[    1.290791] hub 1-1:1.0: 6 ports detected
[    1.304038] usb 3-4: new high-speed USB device number 2 using xhci_hcd
[    1.307456] usb 2-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.00
[    1.307458] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.307691] hub 2-1:1.0: USB hub found
[    1.307787] hub 2-1:1.0: 8 ports detected
[    1.431858] usb 3-4: New USB device found, idVendor=152e, idProduct=2571, bcdDevice= 1.00
[    1.431860] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.431861] usb 3-4: Product: Slim Ext Blu-ray
[    1.431862] usb 3-4: Manufacturer: HLDS Inc
[    1.431863] usb 3-4: SerialNumber: BE34000000000651
[    1.432964] usb-storage 3-4:1.0: USB Mass Storage device detected
[    1.433025] scsi host7: usb-storage 3-4:1.0
[    1.547039] usb 3-9: new low-speed USB device number 3 using xhci_hcd
[    1.592786] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.679365] usb 3-9: New USB device found, idVendor=0458, idProduct=0056, bcdDevice= 1.00
[    1.679367] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.679369] usb 3-9: Product: 4D Scroll Mouse
[    1.679370] usb 3-9: Manufacturer: Genius
[    1.695681] systemd-journald[206]: Received SIGTERM from PID 1 (systemd).
[    1.697028] tsc: Refined TSC clocksource calibration: 3198.147 MHz
[    1.697035] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e1973af5de, max_idle_ns: 440795368835 ns
[    1.697109] clocksource: Switched to clocksource tsc
[    1.718091] systemd: 15 output lines suppressed due to ratelimiting
[    1.776509] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    1.783234] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[    1.795048] usb 3-10: new full-speed USB device number 4 using xhci_hcd
[    1.795185] systemd[1]: Detected architecture x86-64.
[    1.795616] systemd[1]: Set hostname to <solus>.
[    1.868884] systemd[1]: Stopped Switch Root.
[    1.868964] systemd[1]: systemd-journald.service: Service has no hold-off time, scheduling restart.
[    1.869015] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[    1.869023] systemd[1]: Stopped Journal Service.
[    1.869620] systemd[1]: Starting Journal Service...
[    1.869690] systemd[1]: Listening on udev Control Socket.
[    1.869728] systemd[1]: Listening on udev Kernel Socket.
[    1.872749] audit: type=1305 audit(1533396744.670:2): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 res=1
[    1.888758] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.888778] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.888795] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    1.888815] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    1.890660] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    1.900628] systemd-journald[439]: Received request to flush runtime journal from PID 1
[    1.922173] usb 3-10: New USB device found, idVendor=195d, idProduct=1411, bcdDevice= 0.23
[    1.922175] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.922176] usb 3-10: Product: Mionix Wei Gaming Keyboard
[    1.922177] usb 3-10: Manufacturer: Mionix Wei
[    1.947801] audit: type=1400 audit(1533396744.745:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslogd" pid=462 comm="apparmor_parser"
[    1.947803] audit: type=1300 audit(1533396744.745:3): arch=c000003e syscall=1 success=yes exit=35273 a0=6 a1=120bc80 a2=89c9 a3=0 items=0 ppid=461 pid=462 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="apparmor_parser" exe="/sbin/apparmor_parser" key=(null)
[    1.947805] audit: type=1327 audit(1533396744.745:3): proctitle=2F7362696E2F61707061726D6F725F706172736572002D7242002F7661722F63616368652F61612D6C736D2D686F6F6B002D2D61626F72742D6F6E2D6572726F72
[    1.947807] audit: type=1400 audit(1533396744.745:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=464 comm="apparmor_parser"
[    1.947809] audit: type=1300 audit(1533396744.745:4): arch=c000003e syscall=1 success=yes exit=21625 a0=6 a1=120bc80 a2=5479 a3=0 items=0 ppid=461 pid=464 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="apparmor_parser" exe="/sbin/apparmor_parser" key=(null)
[    1.947810] audit: type=1327 audit(1533396744.745:4): proctitle=2F7362696E2F61707061726D6F725F706172736572002D7242002F7661722F63616368652F61612D6C736D2D686F6F6B002D2D61626F72742D6F6E2D6572726F72
[    1.947896] audit: type=1400 audit(1533396744.745:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=465 comm="apparmor_parser"
[    1.947902] audit: type=1300 audit(1533396744.745:5): arch=c000003e syscall=1 success=yes exit=32097 a0=6 a1=120bc80 a2=7d61 a3=0 items=0 ppid=461 pid=465 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="apparmor_parser" exe="/sbin/apparmor_parser" key=(null)
[    2.029867] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    2.029876] ACPI: Power Button [PWRB]
[    2.029913] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    2.029921] ACPI: Power Button [PWRF]
[    2.052450] thermal LNXTHERM:00: registered as thermal_zone0
[    2.052452] ACPI: Thermal Zone [TZ00] (28 C)
[    2.052646] thermal LNXTHERM:01: registered as thermal_zone1
[    2.052647] ACPI: Thermal Zone [TZ01] (30 C)
[    2.060510] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.061486] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20180313/utaddress-213)
[    2.061490] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.061493] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180313/utaddress-213)
[    2.061496] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.061496] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20180313/utaddress-213)
[    2.061499] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180313/utaddress-213)
[    2.061501] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.061501] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20180313/utaddress-213)
[    2.061503] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20180313/utaddress-213)
[    2.061505] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.061506] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.070879] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    2.070904] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.073972] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.082199] EFI Variables Facility v0.08 2004-May-17
[    2.084560] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0x        (ptrval), 14:dd:a9:db:b9:b9, XID 0c000800 IRQ 31
[    2.084562] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.092244] hidraw: raw HID events driver (C) Jiri Kosina
[    2.094392] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    2.095280] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    2.095282] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[    2.101191] usbcore: registered new interface driver usbhid
[    2.101193] usbhid: USB HID core driver
[    2.106078] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input2
[    2.106094] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input3
[    2.106108] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input4
[    2.106121] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
[    2.106135] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[    2.106148] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[    2.111585] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    2.111587] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.111589] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.111589] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.111590] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    2.111591] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.111592] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    2.111594] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    2.111595] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    2.125558] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    2.125574] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    2.125588] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    2.125603] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    2.125618] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    2.144331] intel_rapl: Found RAPL domain package
[    2.144332] intel_rapl: Found RAPL domain core
[    2.144334] intel_rapl: Found RAPL domain dram
[    2.150613] asus_wmi: ASUS WMI generic driver loaded
[    2.150806] iTCO_vendor_support: vendor-support=0
[    2.152118] asus_wmi: Initialization: 0x0
[    2.152138] asus_wmi: BIOS WMI version: 0.9
[    2.152165] asus_wmi: SFUN value: 0x0
[    2.152451] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input13
[    2.152523] asus_wmi: Number of fans: 1
[    2.153030] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.153058] iTCO_wdt: Found a 9 Series TCO device (Version=2, TCOBASE=0x1860)
[    2.153504] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.156605] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    2.167669] input: Genius 4D Scroll Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:0458:0056.0001/input/input14
[    2.169247] [drm] radeon kernel modesetting enabled.
[    2.169278] checking generic (e0000000 12c000) vs hw (e0000000 10000000)
[    2.169279] fb: switching to radeondrmfb from simple
[    2.169302] Console: switching to colour dummy device 80x25
[    2.169544] radeon 0000:01:00.0: SI support disabled by module param
[    2.208296] scsi 6:0:0:0: Direct-Access     WDC WD10 JPVX-22JC3T0     01.0 PQ: 0 ANSI: 5
[    2.219155] sd 6:0:0:0: Attached scsi generic sg4 type 0
[    2.219361] hid-generic 0003:0458:0056.0001: input,hidraw0: USB HID v1.10 Mouse [Genius 4D Scroll Mouse] on usb-0000:00:14.0-9/input0
[    2.219361] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.219487] input: Mionix Wei Mionix Wei Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:195D:1411.0002/input/input15
[    2.219563] sd 6:0:0:0: [sdc] Write Protect is off
[    2.219565] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
[    2.219758] sd 6:0:0:0: [sdc] No Caching mode page found
[    2.219759] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    2.230454] [drm] amdgpu kernel modesetting enabled.
[    2.234071] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    2.234072] AMD IOMMUv2 functionality not available on this system
[    2.237630] CRAT table not found
[    2.237631] Virtual CRAT table created for CPU
[    2.237632] Parsing CRAT table with 1 nodes
[    2.237633] Creating topology SYSFS entries
[    2.237641] Topology: Add CPU node
[    2.237641] Finished initializing topology
[    2.237680] kfd kfd: Initialized module
[    2.238061] [drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6811 0x1787:0x201C 0x00).
[    2.238069] [drm] register mmio base: 0xF7E00000
[    2.238070] [drm] register mmio size: 262144
[    2.238073] [drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
[    2.238074] [drm] probing mlw for device 8086:c01 = 261ad03
[    2.238075] [drm] add ip block number 0 <si_common>
[    2.238076] [drm] add ip block number 1 <gmc_v6_0>
[    2.238076] [drm] add ip block number 2 <si_ih>
[    2.238077] [drm] add ip block number 3 <si_dpm>
[    2.238078] [drm] add ip block number 4 <dce_v6_0>
[    2.238078] [drm] add ip block number 5 <gfx_v6_0>
[    2.238079] [drm] add ip block number 6 <si_dma>
[    2.248280] [drm] BIOS signature incorrect 0 0
[    2.248290] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[    2.248295] caller pci_map_rom+0x58/0xe0 mapping multiple BARs
[    2.248300] amdgpu 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
[    2.248345] ATOM BIOS: 113-T22G02-101
[    2.248485] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    2.250795] amdgpu 0000:01:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[    2.250796] amdgpu 0000:01:00.0: GTT: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[    2.250801] [drm] Detected VRAM RAM=2048M, BAR=256M
[    2.250802] [drm] RAM width 256bits GDDR5
[    2.250850] [TTM] Zone  kernel: Available graphics memory: 8216984 kiB
[    2.250851] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    2.250851] [TTM] Initializing pool allocator
[    2.250854] [TTM] Initializing DMA pool allocator
[    2.251076] [drm] amdgpu: 2048M of VRAM memory ready
[    2.251079] [drm] amdgpu: 3072M of GTT memory ready.
[    2.251128] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    2.251752] amdgpu 0000:01:00.0: PCIE GART of 1024M enabled (table at 0x000000F400040000).
[    2.251818] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.251818] [drm] Driver supports precise vblank timestamp query.
[    2.252365] [drm] Internal thermal controller with fan control
[    2.252374] [drm] amdgpu: dpm initialized
[    2.252484] [drm] AMDGPU Display Connectors
[    2.252485] [drm] Connector 0:
[    2.252485] [drm]   DP-1
[    2.252486] [drm]   HPD4
[    2.252487] [drm]   DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f
[    2.252487] [drm]   Encoders:
[    2.252487] [drm]     DFP1: INTERNAL_UNIPHY2
[    2.252488] [drm] Connector 1:
[    2.252488] [drm]   DP-2
[    2.252489] [drm]   HPD5
[    2.252490] [drm]   DDC: 0x1950 0x1950 0x1951 0x1951 0x1952 0x1952 0x1953 0x1953
[    2.252490] [drm]   Encoders:
[    2.252490] [drm]     DFP2: INTERNAL_UNIPHY2
[    2.252491] [drm] Connector 2:
[    2.252491] [drm]   HDMI-A-1
[    2.252491] [drm]   HPD1
[    2.252492] [drm]   DDC: 0x1954 0x1954 0x1955 0x1955 0x1956 0x1956 0x1957 0x1957
[    2.252493] [drm]   Encoders:
[    2.252493] [drm]     DFP3: INTERNAL_UNIPHY1
[    2.252493] [drm] Connector 3:
[    2.252494] [drm]   DVI-I-1
[    2.252494] [drm]   HPD6
[    2.252495] [drm]   DDC: 0x1960 0x1960 0x1961 0x1961 0x1962 0x1962 0x1963 0x1963
[    2.252495] [drm]   Encoders:
[    2.252496] [drm]     DFP4: INTERNAL_UNIPHY
[    2.252496] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.254135] [drm] PCIE gen 3 link speeds already enabled
[    2.271295] hid-generic 0003:195D:1411.0002: input,hidraw1: USB HID v1.11 Keyboard [Mionix Wei Mionix Wei Gaming Keyboard] on usb-0000:00:14.0-10/input0
[    2.271518] input: Mionix Wei Mionix Wei Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.1/0003:195D:1411.0003/input/input16
[    2.312306]  sdc: sdc1
[    2.313142] sd 6:0:0:0: [sdc] Attached SCSI disk
[    2.323278] hid-generic 0003:195D:1411.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Mionix Wei Mionix Wei Gaming Keyboard] on usb-0000:00:14.0-10/input1
[    2.323381] input: Mionix Wei Mionix Wei Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.2/0003:195D:1411.0004/input/input17
[    2.348199] FS-Cache: Loaded
[    2.358427] RPC: Registered named UNIX socket transport module.
[    2.358428] RPC: Registered udp transport module.
[    2.358429] RPC: Registered tcp transport module.
[    2.358429] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.369507] FS-Cache: Netfs 'nfs' registered for caching
[    2.373826] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    2.375141] hid-generic 0003:195D:1411.0004: input,hidraw3: USB HID v1.11 Keyboard [Mionix Wei Mionix Wei Gaming Keyboard] on usb-0000:00:14.0-10/input2
[    2.386769] NFS: Registering the id_resolver key type
[    2.386775] Key type id_resolver registered
[    2.386776] Key type id_legacy registered
[    2.398109] FS-Cache: Duplicate cookie detected
[    2.398111] FS-Cache: O-cookie c=        (ptrval) [p=        (ptrval) fl=222 nc=0 na=1]
[    2.398112] FS-Cache: O-cookie d=        (ptrval) n=        (ptrval)
[    2.398113] FS-Cache: O-key=[10] '040002000801c0a800de'
[    2.398117] FS-Cache: N-cookie c=        (ptrval) [p=        (ptrval) fl=2 nc=0 na=1]
[    2.398117] FS-Cache: N-cookie d=        (ptrval) n=        (ptrval)
[    2.398118] FS-Cache: N-key=[10] '040002000801c0a800de'
[    2.446242] r8169 0000:03:00.0 enp3s0: link down
[    2.446324] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    2.446950] r8169 0000:03:00.0 enp3s0: link down
[    2.466073] scsi 7:0:0:0: CD-ROM            HL-DT-ST BD-RE BP55EB40   1.00 PQ: 0 ANSI: 0
[    2.479664] sr 7:0:0:0: [sr2] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.479748] sr 7:0:0:0: Attached scsi CD-ROM sr2
[    2.479795] sr 7:0:0:0: Attached scsi generic sg5 type 5
[    2.647544] fuse init (API version 7.26)
[    2.679883] [drm] fb mappable at 0xE0243000
[    2.679884] [drm] vram apper at 0xE0000000
[    2.679884] [drm] size 8294400
[    2.679885] [drm] fb depth is 24
[    2.679885] [drm]    pitch is 7680
[    2.679949] fbcon: amdgpudrmfb (fb0) is primary device
[    2.680040] Console: switching to colour frame buffer device 240x67
[    2.680045] amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[    2.687177] [drm] Initialized amdgpu 3.25.0 20150101 for 0000:01:00.0 on minor 0
[    4.314619] random: crng init done
[    4.314620] random: 7 urandom warning(s) missed due to ratelimiting
[    5.053198] r8169 0000:03:00.0 enp3s0: link up
[    5.053205] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[    5.591907] rfkill: input handler disabled
[    7.425771] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)

betterunborn
Posts: 8
Joined: Wed Jul 26, 2017 7:35 pm

Re: Sound output over HDMI lost (Radeon R270)

Sun Aug 26, 2018 7:11 pm

Hi all, subject solved ... but maybe not the way it should be :oops:

I blacklisted the amdgpu driver by adding "blacklist amdgpu" to file /etc/modprobe.d/blacklist.conf. Then I needed to change default commandline for the kernel, modifying file /usr/lib64/kernel/cmdline-4.17.17-87.current by removing every amdgpu or radeon related entry there. Run "sudo clr-boot-manager update", reboot and all is good.

Problem here is I needed to modify a file which I suspect gets renewed on every kernel update. Is there any safe way to work around this? Seems like the command line options from that file always get added.

Anyone else with problems related to amdgpu and not-yet-so-well-supported HW?

Return to “Hardware”